30 Watt CCT&5 IN 1 LED DIMMABLE DRIVER with junction box constant voltage DSD-12030J,DSD-24030J,DSD-48030J

Short Description:

30Watt CCT & 5 IN 1 LED DIMMABLE DRIVER with junction box Constant Voltage DSD-24030J DSD-12030J...


  • Input Voltage: 110-277V
  • Power Factor: 0.95
  • Dimming: CCT & Triac/0-10V/1-10V/10V PWM/Poteniometer
  • Output Voltage: 12V/24V/48V
  • Output Current: 2.5A/1.25A/0.63A
  • Output Type: Constant Voltage
  • Efficiency: 85%
  • Size: 5.04" L x 4.74" W x 1.65"H
  • Certificate and Reports: UL,cUL, FCC, ROHS,IP65,NEMA 4X
  • Protection Function: Short-circuit, over-temperature, over-load protection
  • Product number: DSD-12030J,DSD-24030J,DSD-48030J
  • Warranty: 5 Years
  • Environment: DRY, DRMP, WET LOCATION

Product Detail

Product Tags

image.png

image.png

Model Number

DSD -12030J

DSD -24030J

DSD -48030J

 

 

 

 

 

Output

Rated Power

30W


Rated Voltage

DC12V

DC24V

DC48V


Rated Current

2.5A

1.25A

0.63A


Voltage Tolerance

±0.5V


Voltage Regulation

±0.5%


Load Regulation

±1%

 

 

 

 

 

 

 

Input

Voltage Range

110-277V


Frequency Range

47-63Hz


Efficiency (Typ.)

85%@120VAC 86%@277VAC


THD

THD<15% (@100% load)


Power Factor (Typ.)

0.99@120VAC 0.98@277VAC


AC Current (Typ.)

0.35A


Inrush Current (Typ.)

18A


Leakage Current

<0.5mA

 

 

Protection

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed.


Over Load

Intelligently reduce the output voltage, auto-recovery or re-power on to recovery.


Over Temperature

100°C±10°C shut down o/p voltage, automatically recover after cooling.

 

 

 

 

Environment

Working Temp.

Tcase=-40~+140º F (-40~+60°C) (Please refer to "OUTPUTLOAD vs TEMPERATURE" section)


Working Humidity

20 ~ 95% RH non-condensing


Storage Temp. Humidity

-40~+194ºF (-40~+90°C), 10~95% RH


Temp. Coefficient

±0.03%/ (050)


Vibration

10500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes

 

 

 

Safety & EMC

Safety Standards

UL8750


Withstand Voltage

I/P-O/P:1.88KVAC


Isolation Resistance

I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH


EMC Emission

Compliance to FCC part 15  Subpart B

Other

Net Weight

0.75kg

image.png

image.png

Mounting

1. This driver must be installed in a well-ventilated area free from explosive gages and vapors. Airculation is essential for heat dissipation.

2. Recommended spacing between LED drivers should be a miminum of 4" (100mm).

3. Do not mount driver close to or above objects that can radiate heat. Vertical mounting is highly recommended.

4. Select an appropriate location that is able to support the weight of the product.

 5. Use the mounting tabs on the left and right side of the driver to mount the product.


image.png

image.png

image.png

image.png


Leave Your Message


Write your message here and send it to us

Leave Your Message


禁止复制哦

如需复制请加VIP会员

×